ROBOT.LK

Posted: **Mon Aug 02, 2010 7:18 pm**

hi,
i am using SPPR200 mobile printer which uses ESC POS commands to print. i am success ful in printing the bitmap image from NV memory but the image is printing away from left edge . it being a line printer may be a problem ad the image format used is WBMP. can anybody help reg. the proper positioning of the image. thanks

Posted: **Mon Aug 02, 2010 8:29 pm**

I'm not sure why it is not accepting your positioning commands. However, why don't you install the Windows driver and use the driver to print graphics? It is less headache.

Posted: **Mon Sep 06, 2010 12:41 pm**

Hi Neo,

Would you be able to tell me what esc command you used to print an image from NV memory?

Posted: **Mon Sep 06, 2010 3:56 pm**

Didn't do this myself as said before. But I found this interesting article about it. Have a look.

Also, for loading and printing bitmaps, see setBitmap method on page 1087 of the Unified POS specification. You can download the specification at: http://www.nrf-arts.org/UnifiedPOS/default.htm

ROBOT.LK

ESC POS bixolon printer bitmap image printing problem

ESC POS bixolon printer bitmap image printing problem

Re: ESC POS bixolon printer bitmap image printing problem

Re: ESC POS bixolon printer bitmap image printing problem

Re: ESC POS bixolon printer bitmap image printing problem