Update Online Database using GSM/GPRS Shield
Posted: Sun Jul 13, 2014 10:16 pm
?? ????? EFCom GPRS/GSM Shield ?? ???????? ???? online database ???? data insert ??? ?????? ???????? ???????
Neo wrote:First you need to study the AT command sequence required to connect to a url and submit data. Then you need write a server side code on your web server to intercept those calls and store data to your database.
You need to contact your seller and ask him to provide you the AT command reference manual for the chip/module you have bought.
If your chip/module is listed in TRONIC.LK, you may contact them to get some help, no matter you bought it from them or not.
Good luck!
yes... we are going to use this module...Neo wrote:Found the right source for you. Have a look at following link.
http://www.elecfreaks.com/wiki/index.ph ... GSM_Shield
You can find SIM900_AT Command Manual_V1.03 at the end of the page under References. That's all need to get you started.
Have a look at section "7 AT Commands for GPRS Support" in the AT commands manual. You can also follow the links below if you are using an Arduino.are there any tutorials about AT commands to connect a url and submit data ?
Neo wrote:Have a look at section "7 AT Commands for GPRS Support" in the AT commands manual. You can also follow the links below if you are using an Arduino.are there any tutorials about AT commands to connect a url and submit data ?
https://robot.lk/viewtopic.php?f=18&t=4350
https://robot.lk/viewtopic.php?f=18&t=4348
https://robot.lk/viewtopic.php?f=18&t=4349