I have a 12v/6A bulb. I need automaticly on off it once a second .
I mean light up time is 1s. Light off time is 1s.
Important : output must be 12v/6A
Can anybody give me a simple circuit. It would be greatly appreciated. Thanks.
[ Post made via Mobile Device ]
how to make a flasher. ....
Re: how to make a flasher. ....
You can use the circuit given below.
http://www.csgnetwork.com/ne555c3.html
As per your current requirement, you may use either a Darlington such as one from TIP series (ex: TIP31) or a FET such as IRF530. Do note to check their datasheets to find out their current sourcing ability. Note that FET connections are different from transistor. You can adjust the blink rate from VR1.
http://www.csgnetwork.com/ne555c3.html
As per your current requirement, you may use either a Darlington such as one from TIP series (ex: TIP31) or a FET such as IRF530. Do note to check their datasheets to find out their current sourcing ability. Note that FET connections are different from transistor. You can adjust the blink rate from VR1.
Re: how to make a flasher. ....
Very useful .thanks a million for your support. You are a wonderful bbrother
[ Post made via Mobile Device ]
[ Post made via Mobile Device ]